AIRFLOW Ultralight Aviation

 

 

Used Ultralight Aircraft for Sale

Under $15,000

Updated Feb 11th. 2010

 

 

All prices in Canadian dollars unless otherwise stated

BEAVER RX 550

PHOTO TO FOLLOW

Beaver Rx 550 Basic Ultralight

Rotax 582

Less than 100 hours total time

Stits covered wings

Lots of extras including a set of gear legs

$13,500.00

Contact: Irwin Hall

604-597-1445

BEAVER RX550-PUDDLE JUMPER AMPHIB FLOATS

Beaver RX550 on Puddle Jumper Amphibious Floats

Rotax 532 with 700hrs tt, Rebuilt at 400hrs with new crank

New 532 still in the box included

VHF Radio

Ballistic shute installed behind the back seat

Double Cables to the Elevators

All Tubing Coated on the inside with Double Boiled Linseed Oil

$10,000.00

Contact Bryan Evans: Tel: 604-536-0252

Email: boeing24u@shaw.ca

 

 

Lazair - floats

Custom Lazair Float Plane

Redrive Rotax 185 engines

44" props

Large storage compartments incorporated into each float.

Assesories include: Wheels, windshield pod, Launch dolly.

Large props give this Lazair great performance even at 4000ft.

Plane is in good condition.

$4,900.00

call Phil Lipscombe at 604-530-9799

 

  

 

Airforce for Sale

Lost medical….must sell… my loss is your gain….

(3) Eipper MX II…C-IFDZ….Two place, Cuyuna 430 Engine, 35 Hp. 15 Hrs. on Airframe and rigging cables since complete rebuild, 45 Hrs. on engine, Wood 2 blade propeller, Full 3-point restraint for both seats, pull start, Hall’s Air speed indicator, very basic two axis flying…… Extras include: long range seat mounted tank, Wheel pants, Complete drive train for Rotax 503 (non-provision) including propeller, bearings, shaft, multi-belt sheaves and engine-mount plates. NEEDS SAILS. Can. $4.500.00 for the Package.

(1) Menard BRX550….. C-IGBT….Tandem 2 Place, Rotax 532 64 Hp. Electric start, 42 hrs. TT on Airframe and Engine. Powerfin 3 blade propeller,

4130 ChromeMoly steel landing gear,

Tundra tires, brakes (cable, front seat Pilot only), steer-able nose wheel, Dual 3-point restraint system, dual controls,

Full VFR panel, streamlined struts, Stits wing and tail surfaces covering, Flaps, Rans S-7 wing-tanks,

Like New seat-covers…………….…… Also includes…

1 Steel Frame T-Hangar (needs new plywood exterior, frame OK.) and 40 foot trailer behind hangar (Aluminum bodied trailer is a former road trailer and was moved to it’s current location on the wheels that it sits on) trailer contains wooden racks for material and a bench with vise included….

Can. $31,500.00 for the Package.

 

(2) Sylvaire Bushmaster I…..C-IDSP ….Single place, Rotax 503 SIDC 52 HP. Pull start, Less than 150 Hrs on Airframe….60 Hrs. on new crank in engine, IVO 3-Blade Propeller with IVO Quick ground adjustable Hub, Full VFR Panel, Long range external tanks, Tundra tires. Aluminum Hubs with Hydraulic non-differential brakes, steer-able tail-wheel, Three-point Harness and Sheepskin seat cover,……………………………….…………………..….. Zenair 750 Straight Floats in Excellent condition (35 Hrs TT on floats)..includes Z mounts no spars……

Can. $18,500.00 for the Package.

 

(3) Eipper MX II…C-IFDZ….Two place, Cuyuna 430 Engine, 35 Hp. 15 Hrs. on Airframe and rigging cables since complete rebuild, 45 Hrs. on engine, Wood 2 blade propeller, Full 3-point restraint for both seats, pull start, Hall’s Air speed indicator, very basic two axis flying…… Extras include: long range seat mounted tank, Wheel pants, Complete drive train for Rotax 503 (non-provision) including propeller, bearings, shaft, multi-belt sheaves and engine-mount plates. NEEDS SAILS. Can. $4.500.00 for the Package.

(4) Spares…Rotax 447 42 Hp. with manual, Rotax 508 40 Hp. (this is a 4 stroke version of the 503) with manual, 3 sets of 503 non-provision cases and crank-shafts, Asstd. 503 Heads, Cylinders,Pistons, Electrics, pull-starts, electric starter with mounting hardware for 503, Asstd "A" and "B" gear-box cases and parts, ………. 5 wooden propellers, all in good usable condition including 1 NEW prop, many NEW Rotax engine parts (NEW Gasket sets for 503, 532, pistons/rings, wristpins/bearings, lots of Bing carb parts, jets, needles, Etc.ALL NEW) Rotax Mufflers (Some NEW)…ROTAX SHOP TOOLS….original Rotax tools to do overhauls and top-end work on all 2 stroke Rotax engines (tools like new) ………

Can. $9,500.00 for the Package.

If you Buy the Whole Air-Force (1,2,3,) I’ll reduce the spares package (4) price to Can. $4,500.00

I will NOT break up packages, please do not ask.

Serious Buyers only, ….please call: Jack Menard: Phone 604-531-9526

E-mail: jpmenard@shaw.ca

 

 

 

 

 

 

 

return to

Home Page

email

airflow@shaw.ca

mailing address

Box 1082 Fort Langley BC V1M 2S4

Tel: 604-619-5914

4981 King George Highway, Surrey BC